Convert Pressure from torr to pounds per square inch (torr to psi)

torr to pound per square inch Conversion Formula

Example

Let's convert 5 torr (torr) to pound per square inch (psi).

Using the formula:

Therefore, 5 torr (torr) is equal to 0.096683835559430921055 pound per square inch (psi).

How many torr are in one pound per square inch? One pound per square inch (psi) contains 51.714952877790338782 torr (torr) — the inverse of the factor above. Multiplying by 0.019336767111886184211 takes you from torr to pounds per square inch; multiplying by 51.714952877790338782 brings you back.

Put in words: one torr equals 0.019336767111886184211 pounds per square inch, so the torr is the smaller unit of this pair. Converting between them never changes the amount of pressure being measured — only the size of the unit you count it in.

What Is a Torr?

A torr (Torr) is a unit of pressure.

It is primarily used to measure a vacuum, or pressures much lower than the air pressure we experience every day.

While the modern standard (SI) unit for pressure is the pascal (Pa), the torr is still widely used in many scientific and engineering fields.

For conversion, one torr is equal to about 133.32 pascals.

A much simpler way to think about it is in relation to our atmosphere: one standard atmosphere (atm) is defined as exactly 760 Torr.

Where Did the Torr Come From?

The unit is named in honor of Evangelista Torricelli, the 17th-century Italian physicist who invented the mercury barometer.

Because of this, one torr was initially defined as being equal to one millimeter of mercury (mmHg).

This means 1 Torr is the pressure exerted by a column of mercury that is one millimeter high.

Torr vs. Atmosphere (atm)

As mentioned, the torr's most convenient relationship is with the standard atmosphere (atm).

One standard atmosphere—the average air pressure at sea level—is set at exactly 760 Torr.

This straightforward, whole-number conversion makes the torr a popular choice for anyone working with fractions of atmospheric pressure.

Where Is the Torr Used Today?

The torr is the primary unit of measurement for high-vacuum and ultra-high-vacuum technology.

Because it is such a small unit (it takes 760 of them to equal one atmosphere), it is ideal for quantifying pressures far below normal air pressure.

You will find the torr used in many advanced scientific and industrial fields, including:

• Semiconductor manufacturing
• Thin-film deposition (like adding anti-reflective coatings to glasses)
• Mass spectrometry
• Particle accelerators
• Vacuum furnaces

What is a pound per square inch (psi)?

A pound per square inch (PSI) is a unit of pressure commonly used in the imperial system (which is standard in the United States).

It measures the amount of force applied over a single square inch of area.

Common Examples of PSI (Where is PSI Used?)

PSI is a critical measurement for safety and performance in many common items, including:

• Vehicle Tires: Proper tire pressure (PSI) ensures optimal handling, fuel efficiency, and tire life. You can find the recommended level on a sticker inside the driver's door.

• Home Water Pressure: Affects everything from shower performance to how well appliances like dishwashers and washing machines function.

• Sports Equipment: Items like footballs, basketballs, and soccer balls require a specific PSI to perform correctly and safely.

• Tools: Air compressors, pressure washers, and paint sprayers all have specific PSI ratings for safe and effective operation.

Converting PSI to Metric Units like Pascals and Bar

While PSI is standard in the imperial system, scientific and international contexts use metric (SI) units like the Pascal (Pa) and the bar.

• PSI to Pascal (Pa): The official SI unit for pressure.
  1 PSI ≈ 6,894.76 Pascals (or 6.895 kilopascals, kPa).

• PSI to Bar: A common unit in automotive and weather contexts. 1 bar is roughly equal to atmospheric pressure at sea level.
  1 PSI ≈ 0.0689 bar.

Understanding the Types of PSI: PSIG, PSIA, and PSID

The term "PSI" can be specified further to give more context:

• PSIG (Pound-force per square inch gauge): Measures pressure relative to the surrounding atmospheric pressure. This is the most common measurement, used by a standard tire gauge.

• PSIA (Pound-force per square inch absolute): Measures pressure relative to a perfect vacuum (absolute zero pressure).
  The formula is: PSIA = PSIG + local atmospheric pressure.

• PSID (Pound-force per square inch differential): Measures the difference in pressure between two separate points in a system, such as across a filter or valve.

torr to pound per square inch Conversion Table

Here are some quick reference conversions from torr (torr) to pound per square inch (psi):