Convert Pressure from torr to millibar (torr to mbar)

What Is a Torr?

A torr (Torr) is a unit of pressure.

It is primarily used to measure a vacuum, or pressures much lower than the air pressure we experience every day.

While the modern standard (SI) unit for pressure is the pascal (Pa), the torr is still widely used in many scientific and engineering fields.

For conversion, one torr is equal to about 133.32 pascals.

A much simpler way to think about it is in relation to our atmosphere: one standard atmosphere (atm) is defined as exactly 760 Torr.

---

Where Did the Torr Come From?

The unit is named in honor of Evangelista Torricelli, the 17th-century Italian physicist who invented the mercury barometer.

Because of this, one torr was initially defined as being equal to one millimeter of mercury (mmHg).

This means 1 Torr is the pressure exerted by a column of mercury that is one millimeter high.

---

Torr vs. Atmosphere (atm)

As mentioned, the torr's most convenient relationship is with the standard atmosphere (atm).

One standard atmosphere—the average air pressure at sea level—is set at exactly 760 Torr.

This straightforward, whole-number conversion makes the torr a popular choice for anyone working with fractions of atmospheric pressure.

---

Where Is the Torr Used Today?

The torr is the primary unit of measurement for high-vacuum and ultra-high-vacuum technology.

Because it is such a small unit (it takes 760 of them to equal one atmosphere), it is ideal for quantifying pressures far below normal air pressure.

You will find the torr used in many advanced scientific and industrial fields, including:

• Semiconductor manufacturing
• Thin-film deposition (like adding anti-reflective coatings to glasses)
• Mass spectrometry
• Particle accelerators
• Vacuum furnaces

What is a millibar (mbar)?

A millibar (mbar) is a metric unit used to measure atmospheric pressure.

It's most commonly used in weather forecasting and reporting.

(Technically, one millibar is equal to 0.1 kilopascal, or kPa).

---

The Role of Millibars in Weather Forecasting

Meteorologists use millibars as the primary unit to measure and report atmospheric pressure.

On weather maps, you'll see lines called isobars, which connect areas of equal pressure, drawn in millibar intervals.

Standard atmospheric pressure at sea level is about 1013 mbar.

This number is a key benchmark for weather conditions:

• High-Pressure System (Anticyclone): Generally above 1013 mbar, associated with clear skies and calm weather.
• Low-Pressure System (Cyclone): Generally below 1013 mbar, often bringing clouds, wind, and storms.

---

Are Millibars and Hectopascals (hPa) the Same?

Yes, for all practical purposes, a millibar (mbar) and a hectopascal (hPa) are the same.

The two units are used interchangeably.

The conversion is simple: 1 mbar = 1 hPa.

While you'll still see millibars in public weather reports (especially in the U.S.), the hectopascal is the preferred SI (International System of Units) unit for global scientific consistency.

---

How to Read Barometric Pressure in Millibars

A barometer measures barometric pressure—the weight of the air above you—using millibars.

Watching the change in this reading is key to predicting the weather:

• A falling barometer (decreasing mbar value) suggests a low-pressure system is approaching, bringing a higher chance of rain or storms.
• A rising barometer (increasing mbar value) typically signals a high-pressure system is moving in, meaning improving or fair weather.