Convert Pressure from millibar to Inches of mercury (mbar to inHg)

millibar to Inch of mercury Conversion Formula

Example

Let's convert 5 millibar (mbar) to Inch of mercury (inHg).

Using the formula:

Therefore, 5 millibar (mbar) is equal to 0.14764990286142431906 Inch of mercury (inHg).

How many millibar are in one inch of mercury? One Inch of mercury (inHg) contains 33.863889532610878529 millibar (mbar) — the inverse of the factor above. Multiplying by 0.029529980572284863811 takes you from millibar to inches of mercury; multiplying by 33.863889532610878529 brings you back.

Put in words: one millibar equals 0.029529980572284863811 inches of mercury, so the millibar is the smaller unit of this pair. Converting between them never changes the amount of pressure being measured — only the size of the unit you count it in.

What is a millibar (mbar)?

A millibar (mbar) is a metric unit used to measure atmospheric pressure.

It's most commonly used in weather forecasting and reporting.

(Technically, one millibar is equal to 0.1 kilopascal, or kPa).

The Role of Millibars in Weather Forecasting

Meteorologists use millibars as the primary unit to measure and report atmospheric pressure.

On weather maps, you'll see lines called isobars, which connect areas of equal pressure, drawn in millibar intervals.

Standard atmospheric pressure at sea level is about 1013 mbar.

This number is a key benchmark for weather conditions:

• High-Pressure System (Anticyclone): Generally above 1013 mbar, associated with clear skies and calm weather.
• Low-Pressure System (Cyclone): Generally below 1013 mbar, often bringing clouds, wind, and storms.

Are Millibars and Hectopascals (hPa) the Same?

Yes, for all practical purposes, a millibar (mbar) and a hectopascal (hPa) are the same.

The two units are used interchangeably.

The conversion is simple: 1 mbar = 1 hPa.

While you'll still see millibars in public weather reports (especially in the U.S.), the hectopascal is the preferred SI (International System of Units) unit for global scientific consistency.

How to Read Barometric Pressure in Millibars

A barometer measures barometric pressure—the weight of the air above you—using millibars.

Watching the change in this reading is key to predicting the weather:

• A falling barometer (decreasing mbar value) suggests a low-pressure system is approaching, bringing a higher chance of rain or storms.
• A rising barometer (increasing mbar value) typically signals a high-pressure system is moving in, meaning improving or fair weather.

What is an Inch of Mercury (inHg)?

An inch of mercury, often abbreviated as inHg, is a unit of pressure.

It is not part of the standard metric (SI) system but is widely used in the United States and in specific fields like meteorology and aviation.

The unit is defined by its name: it is the amount of pressure exerted by a column of liquid mercury exactly one inch tall at a standard temperature.

Where is inHg Used?

You will most commonly encounter inches of mercury in a few key areas:

• Weather Reporting: In the U.S., inHg is the standard unit for reporting barometric pressure (also known as atmospheric pressure).
  A "high" pressure system indicating clear weather might be around 30.50 inHg, while a "low" pressure system associated with storms could be 28.50 inHg.

• Aviation: This measurement is critical for pilot safety.
  Pilots use the local barometric pressure (in inHg) to calibrate their altimeters—instruments that measure altitude—to ensure they are flying at the correct height.

• Vacuum Systems: The unit is also widely used in science and industry to measure vacuum pressure.
  This is common in systems like air conditioning, refrigeration, and for monitoring the manifold pressure in piston engines.

How to Convert inHg to Other Pressure Units

Because inHg is not a global standard, it's often necessary to convert it to other pressure units for calculations or international use.

Here are the most common conversions for 1 inHg:

• 0.491154 pounds per square inch (PSI)
• 33.86 millibars (mbar)
• 3,386.39 pascals (Pa)
• 0.000491154 kilopound per square inch (ksi)

millibar to Inch of mercury Conversion Table

Here are some quick reference conversions from millibar (mbar) to Inch of mercury (inHg):