Choose a Measurement
Select a measurement and convert between different units
Single conversion
To convert from millibar (mbar) to megapascal (MPa), use the following formula:
Let's convert 5 millibar (mbar) to megapascal (MPa).
Using the formula:
Therefore, 5 millibar (mbar) is equal to megapascal (MPa).
Here are some quick reference conversions from millibar (mbar) to megapascal (MPa):
| millibar | megapascals |
|---|---|
| 0.000001 mbar | MPa |
| 0.001 mbar | MPa |
| 0.1 mbar | MPa |
| 1 mbar | MPa |
| 2 mbar | MPa |
| 3 mbar | MPa |
| 4 mbar | MPa |
| 5 mbar | MPa |
| 6 mbar | MPa |
| 7 mbar | MPa |
| 8 mbar | MPa |
| 9 mbar | MPa |
| 10 mbar | MPa |
| 20 mbar | MPa |
| 30 mbar | MPa |
| 40 mbar | MPa |
| 50 mbar | MPa |
| 100 mbar | MPa |
| 1000 mbar | MPa |
| 10000 mbar | MPa |
For all Pressure converters, choose units using the From/To dropdowns above.
A millibar (mbar) is a metric unit used to measure atmospheric pressure.
It's most commonly used in weather forecasting and reporting.
(Technically, one millibar is equal to 0.1 kilopascal, or kPa).
Meteorologists use millibars as the primary unit to measure and report atmospheric pressure.
On weather maps, you'll see lines called isobars, which connect areas of equal pressure, drawn in millibar intervals.
Standard atmospheric pressure at sea level is about 1013 mbar.
This number is a key benchmark for weather conditions:
Yes, for all practical purposes, a millibar (mbar) and a hectopascal (hPa) are the same.
The two units are used interchangeably.
The conversion is simple: 1 mbar = 1 hPa.
While you'll still see millibars in public weather reports (especially in the U.S.), the hectopascal is the preferred SI (International System of Units) unit for global scientific consistency.
A barometer measures barometric pressure—the weight of the air above you—using millibars.
Watching the change in this reading is key to predicting the weather:
If you've ever looked at engineering specifications, construction materials, or high-pressure equipment, you've likely seen the term 'MPa.'
A megapascal (MPa) is a unit of pressure in the metric system, equal to one thousand kilopascals (1000 kPa).
The plural form is megapascals.
The megapascal (MPa) is a fundamental unit for quantifying the strength of materials in engineering and construction.
It is commonly used to express a material's ultimate tensile strength (the maximum stress it can withstand while being pulled apart) and compressive strength (its resistance to being squeezed).
For example, structural steel might have a tensile strength of 400 MPa. In comparison, high-performance concrete can have a compressive strength exceeding 80 MPa.
Understanding how to convert megapascals to other pressure units is crucial for global applications.
Here are the most common conversions:
The pound per square inch (PSI) is a unit commonly used in the United States for measuring tire pressure and hydraulic systems.
The bar is a unit often used in Europe for weather forecasting and scuba diving.
Megapascals are used to describe immense pressures found in both natural and industrial settings.
The water pressure at the bottom of the Mariana Trench, the deepest point in the ocean, is about 108.6 MPa.
In industry, a high-pressure waterjet cutter operates at pressures ranging from 200 to 600 MPa, demonstrating enough force to slice through metal and stone.