Select a category and enter your values below
Multiple conversions
To convert electric current from microamperes (μA) to amperes (A), divide by 1,000,000 (10⁶).
The micro prefix means one millionth, so the conversion is an exact six-place decimal shift. Going through the intermediate step often feels more natural: 1,000 μA = 1 mA, and 1,000 mA = 1 A.
A battery-powered sensor node draws 150 μA in sleep mode, and you want the value in amperes to estimate battery life:
| μA | A |
|---|---|
| 1 | 0.000001 |
| 10 | 0.00001 |
| 100 | 0.0001 |
| 150 | 0.00015 |
| 1,000 | 0.001 |
| 1,000,000 | 1 |
Microamperes are the working range of modern low-power electronics and precision measurement. Microcontroller datasheets specify deep-sleep consumption in μA (or even nA); real-time-clock chips, leakage through capacitors and reverse-biased diodes, sensor bias currents and insulation-resistance test results all live in this range. Two practical contexts make the conversion matter beyond datasheets. Battery-life budgeting: capacity is stated in ampere-hours or mAh, so μA figures must move at least three decimal places before the division — mixing μA with mAh without converting is the most common way hobby IoT projects end up with a battery estimate 1,000× too optimistic. Safety and leakage testing: medical-device standards (IEC 60601) cap patient leakage currents at tens or hundreds of μA, while the equations behind the limits work in amperes. The prefix ladder is worth keeping visible in lab notes — μA → mA → A, a factor of 1,000 per rung — because six zeros counted by eye are exactly the kind of thing that goes wrong at the end of a long day.
To convert from Microampere (μA) to Milliampere (mA), use the following formula:
Milliampere (mA)
= 1106 × 1000× Microampere (μA)
= 11000× Microampere (μA)
= 0.001× Microampere (μA)
To convert from Microampere (μA) to Kiloampere (kA), use the following formula:
Kiloampere (kA)
= 1106 × 11000× Microampere (μA)
= 1109× Microampere (μA)
= 10-9× Microampere (μA)
To convert from Microampere (μA) to Megaampere (MA), use the following formula:
Megaampere (MA)
= 1106 × 1106× Microampere (μA)
= 11012× Microampere (μA)
= 10-12× Microampere (μA)
A microampere (μA) is a tiny unit used to measure electrical current.
As part of the International System of Units (SI), it represents one-millionth of an ampere (10-6 A). Think of an ampere as a river of electrical charge; a microampere would be just a tiny trickle from that river.
Did you know your body runs on electricity? Electrical currents in the microampere range are essential for life.
For example, your nervous system uses these tiny electrical signals to communicate. This natural process inspires advanced medical treatments like Microcurrent Electrical Neuromuscular Stimulation (MENS).
MENS uses currents under 1000 μA to mirror the body's natural bio-electricity, helping to promote healing, reduce pain, and decrease inflammation.
The microampere is a key measurement in the world of low-power electronics.
Devices like IoT sensors, smartwatches, and other wearable tech are designed to use as little energy as possible to extend battery life. Engineers measure current in the microampere range to ensure these gadgets are ultra-energy-efficient.
When it comes to electrical safety, microamperes are crucial for measuring "leakage current"—a tiny, unintended electrical current that can flow from a device.
To protect you from electric shock, safety standards for electronics and medical equipment limit this leakage to just a few hundred microamperes.
Precise microampere measurements are therefore vital for ensuring product safety and compliance.