Select a category and enter your values below
To convert from Minute (min) to Day (d), use the following formula:
Let's convert 5 Minute (min) to Day (d).
Using the formula:
Therefore, 5 Minute (min) is equal to Day (d).
Here are some quick reference conversions from Minute (min) to Day (d):
| Minutes | Days |
|---|---|
| 0.000001 min | d |
| 0.001 min | d |
| 0.1 min | d |
| 1 min | d |
| 2 min | d |
| 3 min | d |
| 4 min | d |
| 5 min | d |
| 6 min | d |
| 7 min | d |
| 8 min | d |
| 9 min | d |
| 10 min | d |
| 20 min | d |
| 30 min | d |
| 40 min | d |
| 50 min | d |
| 100 min | d |
| 1000 min | d |
| 10000 min | d |
A minute (min) is a unit of time equal to 60 seconds.
It is one of the most common ways we measure time, with 60 minutes making up one hour. While we use it every day, the minute has a fascinating history and is used for more than just telling time.
The reason a minute has 60 seconds and an hour has 60 minutes dates back to the ancient Babylonians. Around 2000 B.C., they used a sexagesimal (base-60) numbering system, which they inherited from the Sumerians.
This system was efficient because the number 60 can be divided by many other numbers (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30), which made calculating fractions simple.
The word "minute" itself comes from the Latin phrase pars minuta prima, meaning the "first small part" of an hour.
Beyond timekeeping, the minute is also a critical unit for measuring angles in geography and navigation. An "arcminute" (also called a minute of arc) is an angular measurement equal to 1/60th of a degree.
You will see arcminutes used in latitude and longitude coordinates to pinpoint exact locations on a map. For example, a location might be written as 34° 05' N, where '05' stands for five arcminutes.
As a fun fact, one nautical mile was historically defined as exactly one minute of arc of the Earth's latitude.
The 24-hour day is the most basic unit we use to organize our lives. But what exactly defines a day, and is it always the same length?
A standard solar day, on which our clocks are based, is the time it takes for the Earth to rotate so that the Sun appears in the same position in the sky. This works out to be 86,400 seconds.
However, the story of a day is a bit more complex.
While we live by the 24-hour solar day, Earth's true rotation period is slightly shorter.
A sidereal day is the time it takes for Earth to rotate 360 degrees on its axis relative to distant stars. This period is actually 23 hours, 56 minutes, and 4 seconds.
So why is the solar day we use about four minutes longer? It's because while the Earth is spinning, it's also orbiting the Sun. After one full rotation (a sidereal day), it has to spin a little bit extra to "catch up" and bring the Sun back to the same point in the sky. That extra rotation time gives us our 24-hour solar day.
Yes, but don't adjust your watch just yet! The length of a day on Earth is slowly increasing.
This is due to a process called tidal braking, where the Moon's gravitational pull creates a slight drag on our planet's rotation, slowing it down.
This effect is minimal, adding only about 1.7 milliseconds to the length of a day every century. Although you may not notice it, it adds up over geological time. For example, when dinosaurs lived, a day on Earth was approximately 23 hours long.
Even though our clocks run on a steady 24-hour cycle, the actual length of a solar day (from one noon to the next) varies slightly throughout the year. The 24-hour day is just an average.
Two main factors cause this variation: