Convert Reactive Energy from Kilovolt-Amperes Reactive Hour to Megavolt-Amperes Reactive Hour (kVARh to MVARh)

Kilovolt-Ampere Reactive Hour to Megavolt-Ampere Reactive Hour Conversion Formula

Example

Let's convert 5 Kilovolt-Ampere Reactive Hour (kVARh) to Megavolt-Ampere Reactive Hour (MVARh).

Using the formula:

Therefore, 5 Kilovolt-Ampere Reactive Hour (kVARh) is equal to 0.005 Megavolt-Ampere Reactive Hour (MVARh).

How many kilovolt-amperes reactive hour are in one megavolt-ampere reactive hour? One Megavolt-Ampere Reactive Hour (MVARh) contains 1000 Kilovolt-Amperes Reactive Hour (kVARh) — the inverse of the factor above. Multiplying by 0.001 takes you from kilovolt-amperes reactive hour to megavolt-amperes reactive hour; multiplying by 1000 brings you back.

Put in words: one kilovolt-ampere reactive hour equals 0.001 megavolt-amperes reactive hour, so the kilovolt-ampere reactive hour is the smaller unit of this pair. Converting between them never changes the amount of reactive energy being measured — only the size of the unit you count it in.

What Is a Kilovolt-Ampere Reactive Hour (kVARh)?

A Kilovolt-Ampere Reactive Hour (kVARh) is the standard unit used to measure reactive energy.

It is a larger multiple of the base unit, the Volt-Ampere Reactive Hour (VARh).

• 1 kVARh = 1,000 VARh

How kVARh Affects Energy Efficiency

Reactive energy is often called "wasted" or "non-working" power.

Here's a simple comparison:

• Active Energy (kWh): This is the "useful" power that does real work, like lighting a room or running a machine.
• Reactive Energy (kVARh): This is the power required to create and sustain the magnetic fields in heavy equipment like motors, transformers, and pumps.

A high kVARh reading indicates a low power factor, which means your electrical system is inefficient.

It's drawing more current from the grid than it actually needs to perform the useful work.

High kVARh Can Increase Your Electricity Bill

Many utility providers, especially for commercial and industrial customers, issue penalties for high reactive energy consumption.

High kVARh levels force the utility to generate and transmit more current to meet your demand, which puts extra strain on their transformers and distribution lines.

These costs are then passed on to you, often appearing as a "power factor penalty" or "reactive power charge" on your monthly electricity bill.

How to Reduce kVARh and Lower Your Bill

You can lower your kVARh consumption through a process called power factor correction.

The most common method is installing capacitor banks, which act as local reactive power generators. By supplying this energy on-site, they reduce the amount of reactive power you need to pull from the grid.

This process directly:

• Lowers your recorded kVARh
• Improves overall system efficiency
• Frees up electrical capacity in your system
• Eliminates costly power factor penalties

What Is MVARh (Megavolt-Ampere Reactive Hour)?

A Megavolt-Ampere Reactive Hour (MVARh) is a unit of measurement for reactive energy. It is a large-scale unit, equal to one million volt-amperes reactive hour (VARh).

What MVARh Measures: Understanding "Non-Working" Energy

A Megavolt-Ampere Reactive Hour (MVARh) quantifies the total amount of reactive energy consumed or produced over one hour. This is the "non-working" energy required to sustain magnetic fields in inductive equipment like motors and transformers.

While it doesn't contribute to actual work (like heat or motion), its flow is essential for the operation of an AC power system, and utilities track it to ensure grid stability and efficiency.

Why MVARh Matters: Power Factor and Utility Bills

High MVARh consumption is a primary indicator of a low power factor, which signifies an inefficient electrical system. This inefficiency forces utility grids to transport more current than necessary to deliver the same amount of useful energy, leading to increased line losses.

Consequently, many utilities impose a "power factor penalty" or a reactive power charge on commercial and industrial customers' bills. Managing and reducing MVARh is a key strategy for lowering electricity costs.

MVARh vs. MWh: Reactive Energy vs. Real Energy

While often discussed together, MVARh and MWh (Megawatt-Hour) measure two distinct types of energy.

MWh represents real or active energy—the power that performs useful work. In contrast, MVARh represents reactive energy—the power that sustains electromagnetic fields.

Both are components of the total apparent energy (measured in MVAh). Optimizing an electrical system involves minimizing MVARh to ensure that the majority of the supplied energy is productive MWh.

How to Reduce MVARh and Lower Costs

Since high MVARh consumption leads to inefficiency and penalty fees, managing it is a key strategy for lowering electricity costs.

The most common method to reduce reactive power is called power factor correction. This typically involves installing capacitor banks at your facility, which act as a local source of reactive energy, reducing the amount you need to draw from the utility grid.

A Simple Analogy: The Beer Mug

A helpful way to understand these concepts is the "beer mug analogy."

• Real Power (MWh): This is the beer itself. It's the useful part you actually want.
• Reactive Power (MVARh): This is the foam. It's not useful, but it's a necessary part of the total volume in the mug.
• Apparent Power (MVAh): This is the entire mug (beer + foam).

A low power factor means your mug has too much foam (MVARh) and not enough beer (MWh). You're paying for a full mug but getting less of the useful product. Power factor correction is like adjusting the tap to get more beer and less foam in your mug.

Kilovolt-Ampere Reactive Hour to Megavolt-Ampere Reactive Hour Conversion Table

Here are some quick reference conversions from Kilovolt-Ampere Reactive Hour (kVARh) to Megavolt-Ampere Reactive Hour (MVARh):