Select a category and enter your values below
To convert from Millimeter (mm) to US Survey Foot (ft-us), use the following formula:
US Survey Foot (ft-us)
= 11000 × 10.3048 × 11.000002× Millimeter (mm)
= 0.0032808333333464566667× Millimeter (mm)
With 10.3048 is the ratio between the base units Foot (ft) and Meter (m).
Let's convert 5 Millimeter (mm) to US Survey Foot (ft-us).
Using the formula:
5 × 0.0032808333333464566667 = 0.016404166666732283334
Therefore, 5 Millimeter (mm) is equal to 0.016404166666732283334 US Survey Foot (ft-us).
How many millimeters are in one us survey foot? One US Survey Foot (ft-us) contains 304.8006096 Millimeters (mm) — the inverse of the factor above. Multiplying by 0.0032808333333464566667 takes you from millimeters to us survey feet; multiplying by 304.8006096 brings you back.
Put in words: one millimeter equals 0.0032808333333464566667 us survey feet, so the millimeter is the smaller unit of this pair. Converting between them never changes the amount of length being measured — only the size of the unit you count it in.
A millimeter (mm) is a small unit of length in the metric system, equal to one-thousandth of a meter (1/1000 m or 0.001 m).
The word itself comes from the Latin "mille," meaning "thousand."
This is why the prefix "milli" in the metric system always means one-thousandth of a base unit—just like a milligram is one-thousandth of a gram.
The plural form is millimeters.
Understanding the relationship between millimeters and inches is crucial, particularly for projects that utilize both metric and imperial systems.
The official mm-to-inch conversion is a precise measurement used worldwide in engineering and manufacturing.
The millimeter is the standard unit for measuring small distances with precision.
You likely encounter millimeter measurements more often than you think in daily life, science, and technology.
The US Survey Foot is a unit of length historically used for land surveying in the United States.
It is very close in length to the international foot, equaling approximately 1.000002 international feet (ft). The plural form is US Survey Feet.
The origin of the US Survey Foot dates back to the Mendenhall Order of 1893. This order defined the relationship between the meter and US customary units.
It established that 1 meter is precisely equal to 39.37 inches. From this relationship, the US Survey Foot was derived, defined as 1200/3937 meters.
This definition differs slightly from the international foot, which was established in 1959 and is defined as exactly 0.3048 meters.
To simplify measurements and prevent confusion, the National Institute of Standards and Technology (NIST) and the National Geodetic Survey (NGS) made a critical change.
They officially retired the U.S. Survey Foot on December 31, 2022.
Surveying and mapping applications in the United States will now use the international foot. This critical change helps unify the National Spatial Reference System (NSRS) and prevents costly errors in large-scale projects.
While the difference between a US Survey Foot and an international foot is minuscule—only about two parts per million—it becomes significant over large distances.
For every mile, the discrepancy adds up to approximately 1/8 inch.
This minor error may not be significant for a backyard fence. However, for massive construction projects and infrastructure development, such as bridges that cross state lines, the accumulated error can lead to severe misalignments and costly mistakes.
Here are some quick reference conversions from Millimeter (mm) to US Survey Foot (ft-us):
| Millimeters | US Survey Feet |
|---|---|
| 0.000001 mm | 3.2808333333464566667× 10-9 ft-us |
| 0.001 mm | 0.0000032808333333464566667 ft-us |
| 0.1 mm | 0.00032808333333464566667 ft-us |
| 1 mm | 0.0032808333333464566667 ft-us |
| 2 mm | 0.0065616666666929133334 ft-us |
| 3 mm | 0.0098425000000393700001 ft-us |
| 4 mm | 0.013123333333385826667 ft-us |
| 5 mm | 0.016404166666732283334 ft-us |
| 6 mm | 0.01968500000007874 ft-us |
| 7 mm | 0.022965833333425196667 ft-us |
| 8 mm | 0.026246666666771653334 ft-us |
| 9 mm | 0.02952750000011811 ft-us |
| 10 mm | 0.032808333333464566667 ft-us |
| 20 mm | 0.065616666666929133334 ft-us |
| 30 mm | 0.098425000000393700001 ft-us |
| 40 mm | 0.13123333333385826667 ft-us |
| 50 mm | 0.16404166666732283334 ft-us |
| 100 mm | 0.32808333333464566667 ft-us |
| 1000 mm | 3.2808333333464566667 ft-us |
| 10000 mm | 32.808333333464566667 ft-us |
For all Length converters, choose units using the From/To dropdowns above.