Modern Converts Logo

Modern Converts

Convert between different units quickly and accurately in a modern way

Choose a Measurement

Select a measurement and convert between different units

Convert Length from Mil to Nautical Mile (mil to nMi)

Single conversion

On This Page

Mil to Nautical Mile Conversion FormulaExampleWhat is a Mil?Where Does the Name 'Mil' Come From?What is a Mil Used For?Mil vs. MM: What's the Difference?What is a Nautical Mile (nmi)?Why is a Nautical Mile Based on the Earth's Circumference?What's the Difference Between a Nautical Mile and a Statute Mile?What is a Knot and How Does it Relate to Speed?What is the imperial system?Mil to Nautical Mile Conversion Table

Mil to Nautical Mile Conversion Formula

To convert from Mil (mil) to Nautical Mile (nMi), use the following formula:

 Nautical Mile (nMi)\textbf{ Nautical Mile} \text{ (nMi)}

=112000×16076.12× Mil (mil)= \frac{1}{12000} \times \frac{1}{6076.12}\times \textbf{ Mil} \text{ (mil)}

=1.3714892617876759072×10−8× Mil (mil)= 1.3714892617876759072\times 10^{-8}\times \textbf{ Mil} \text{ (mil)}

Example

Let's convert 5 Mil (mil) to Nautical Mile (nMi).

Using the formula:

5×1.3714892617876759072×10−8=6.857446308938379536×10−85 \times 1.3714892617876759072\times 10^{-8} = 6.857446308938379536\times 10^{-8}

Therefore, 5 Mil (mil) is equal to 6.857446308938379536×10−86.857446308938379536\times 10^{-8} Nautical Mile (nMi).

What is a Mil?

A mil is a tiny unit of length in the imperial system of measurement.

Its most crucial definition is simple: one mil is equal to one-thousandth of an inch (1/1000 or 0.001 inches).

The plural form of the unit is mils.

Where Does the Name 'Mil' Come From?

The name "mil" comes from the Latin word millesimum, which means "thousandth"—a perfect fit for a unit that represents 1/1000th of an inch.

In engineering and manufacturing, especially in the UK, you might also hear a mil referred to as a thou. This nickname helps prevent confusion with metric units, such as the millimeter.

What is a Mil Used For?

The mil measurement is essential in industries where precision is key, even over minimal distances.

To give you some perspective, a human hair is about 2 to 4 mils thick.

This unit is commonly used to specify the thickness or diameter of:

  • Thin materials like plastic bags and foils
  • Coatings, such as layers of paint or plating
  • Paper and cardstock
  • Wires and electrical conductors
  • Manufacturing tolerances for electronic parts, like printed circuit boards (PCBs)

Mil vs. MM: What's the Difference?

It's crucial not to confuse the imperial mil with the metric millimeter (mm). A millimeter is a much larger unit of measurement.

Here's a simple breakdown of the mil vs. mm conversion:

  • 1 mil = 0.0254 mm
  • 1 mm = 39.37 mils

As you can see, one millimeter is nearly 40 times larger than one mil.

It is crucial to specify the units used in technical specifications to avoid significant mistakes.

What is a Nautical Mile (nmi)?

A nautical mile (nmi) is a unit of measurement used for sea and air travel, equal to 6,076 feet or 1,852 meters.

Quick Facts:

  • 1 Nautical Mile = 1.15 statute miles (6,076 feet or 1,852 meters).
  • It is based on the Earth's circumference (longitude and latitude).
  • It is the standard unit of measurement for sea and air navigation.
  • Speed for sea and air travel is measured in knots (one nautical mile per hour).

Why is a Nautical Mile Based on the Earth's Circumference?

A nautical mile is based directly on the size and shape of the Earth.

It is defined as one minute of arc along a meridian (a line of longitude).

Imagine the Earth as a circle of 360 degrees. Each of those degrees is divided into 60 smaller parts called "minutes."

One nautical mile is equal to one of these minutes of latitude.

This direct link to the planet's geometry makes the nautical mile essential for navigators, as it simplifies calculations on maps and charts.

What's the Difference Between a Nautical Mile and a Statute Mile?

While they both measure distance, nautical miles and statute miles (used on land) are not the same.

The key difference lies in how they are calculated and used.

  • Statute Mile: This is the mile you know from road signs, equal to 5,280 feet. It's a fixed distance that doesn't take into account the Earth's curvature.

  • Nautical Mile: This is a longer measurement, approximately 1.15 statute miles (6,076 feet). It is based on the Earth's curvature, aligning with the degrees of latitude and longitude used on navigational charts.

Using statute miles for long-distance sea or air travel would lead to significant errors, which is why navigators exclusively use nautical miles to ensure accuracy.

What is a Knot and How Does it Relate to Speed?

In maritime and aviation, speed isn't measured in miles per hour—it's measured in knots.

A knot is a unit of speed, not distance.

It is defined simply as one nautical mile per hour. This makes calculations very straightforward: a ship traveling at a steady 15 knots will cover 15 nautical miles in precisely one hour.

The term comes from the old sailors' practice of using a rope with knots tied at regular intervals, thrown overboard, to measure a ship's speed.

What is the imperial system?

The imperial system is a system of measurement that was first defined in the British Weights and Measures Act of 1824. It's known for using units like inches, feet, pounds, and gallons. While most of the world now uses the metric system, the imperial system remains the official system of measurement in the United States and is still used in specific contexts in other countries, such as the United Kingdom and Canada.

Mil to Nautical Mile Conversion Table

Here are some quick reference conversions from Mil (mil) to Nautical Mile (nMi):

MilsNautical Miles
0.000001 mil1.3714892617876759072×10−141.3714892617876759072\times 10^{-14} nMi
0.001 mil1.3714892617876759072×10−111.3714892617876759072\times 10^{-11} nMi
0.1 mil1.3714892617876759072×10−91.3714892617876759072\times 10^{-9} nMi
1 mil1.3714892617876759072×10−81.3714892617876759072\times 10^{-8} nMi
2 mil2.7429785235753518144×10−82.7429785235753518144\times 10^{-8} nMi
3 mil4.1144677853630277216×10−84.1144677853630277216\times 10^{-8} nMi
4 mil5.4859570471507036288×10−85.4859570471507036288\times 10^{-8} nMi
5 mil6.857446308938379536×10−86.857446308938379536\times 10^{-8} nMi
6 mil8.2289355707260554432×10−88.2289355707260554432\times 10^{-8} nMi
7 mil9.6004248325137313504×10−89.6004248325137313504\times 10^{-8} nMi
8 mil1.0971914094301407258×10−71.0971914094301407258\times 10^{-7} nMi
9 mil1.2343403356089083165×10−71.2343403356089083165\times 10^{-7} nMi
10 mil1.3714892617876759072×10−71.3714892617876759072\times 10^{-7} nMi
20 mil2.7429785235753518144×10−72.7429785235753518144\times 10^{-7} nMi
30 mil4.1144677853630277216×10−74.1144677853630277216\times 10^{-7} nMi
40 mil5.4859570471507036288×10−75.4859570471507036288\times 10^{-7} nMi
50 mil6.857446308938379536×10−76.857446308938379536\times 10^{-7} nMi
100 mil0.00000137148926178767590720.0000013714892617876759072 nMi
1000 mil0.0000137148926178767590720.000013714892617876759072 nMi
10000 mil0.000137148926178767590720.00013714892617876759072 nMi

List some Length Converters:

For all Length converters, choose units using the From/To dropdowns above.

mil to nMi | Convert Mil to Nautical Mile | Single Conversion