Select a category and enter your values below
To convert from US Survey Foot (ft-us) to Mile (mi), use the following formula:
Mile (mi)
= 1.000002 × 15280× US Survey Foot (ft-us)
= 0.00018939431818181818182× US Survey Foot (ft-us)
Let's convert 5 US Survey Foot (ft-us) to Mile (mi).
Using the formula:
5 × 0.00018939431818181818182 = 0.0009469715909090909091
Therefore, 5 US Survey Foot (ft-us) is equal to 0.0009469715909090909091 Mile (mi).
How many us survey feet are in one mile? One Mile (mi) contains 5279.9894400211199578 US Survey Feet (ft-us) — the inverse of the factor above. Multiplying by 0.00018939431818181818182 takes you from us survey feet to miles; multiplying by 5279.9894400211199578 brings you back.
Put in words: one us survey foot equals 0.00018939431818181818182 miles, so the us survey foot is the smaller unit of this pair. Converting between them never changes the amount of length being measured — only the size of the unit you count it in.
The US Survey Foot is a unit of length historically used for land surveying in the United States.
It is very close in length to the international foot, equaling approximately 1.000002 international feet (ft). The plural form is US Survey Feet.
The origin of the US Survey Foot dates back to the Mendenhall Order of 1893. This order defined the relationship between the meter and US customary units.
It established that 1 meter is precisely equal to 39.37 inches. From this relationship, the US Survey Foot was derived, defined as 1200/3937 meters.
This definition differs slightly from the international foot, which was established in 1959 and is defined as exactly 0.3048 meters.
To simplify measurements and prevent confusion, the National Institute of Standards and Technology (NIST) and the National Geodetic Survey (NGS) made a critical change.
They officially retired the U.S. Survey Foot on December 31, 2022.
Surveying and mapping applications in the United States will now use the international foot. This critical change helps unify the National Spatial Reference System (NSRS) and prevents costly errors in large-scale projects.
While the difference between a US Survey Foot and an international foot is minuscule—only about two parts per million—it becomes significant over large distances.
For every mile, the discrepancy adds up to approximately 1/8 inch.
This minor error may not be significant for a backyard fence. However, for massive construction projects and infrastructure development, such as bridges that cross state lines, the accumulated error can lead to severe misalignments and costly mistakes.
A mile (mi) is a common unit of length used in the imperial and US customary systems of measurement.
The official definition of a mile is 5,280 feet (ft). The plural form is miles.
The word "mile" has ancient roots, originating from the Latin phrase "mille passus," which translates to "a thousand paces."
In ancient Rome, one pace was measured as two steps (one left and one right). The Roman mile was therefore 1,000 paces, which equals approximately 4,850 feet—slightly shorter than the modern mile.
Not all miles are created equal. While most people are familiar with the land mile, there is also a separate measurement used for air and sea travel.
The commonly used mile on land is the statute mile, which is officially defined as 5,280 feet. This measurement is used for driving distances and most other land-based activities in the imperial system.
The nautical mile is used for navigation in aviation and maritime settings. It is based on the Earth's circumference and is equal to one minute of arc of latitude. A nautical mile is longer than a statute mile.
Here's a quick comparison:
The seemingly random number of 5,280 feet in a mile comes from English history. In 1593, the English Parliament, under Queen Elizabeth I, passed a statute to standardize units of measurement.
The statute defined the official length of a mile as being equal to 8 furlongs. Since one furlong was already established as 660 feet, the calculation was simple:
This decision solidified the length of the statute mile that we still use today in countries that follow the imperial system.
Here are some quick reference conversions from US Survey Foot (ft-us) to Mile (mi):
| US Survey Feet | Miles |
|---|---|
| 0.000001 ft-us | 1.8939431818181818182× 10-10 mi |
| 0.001 ft-us | 1.8939431818181818182× 10-7 mi |
| 0.1 ft-us | 0.000018939431818181818182 mi |
| 1 ft-us | 0.00018939431818181818182 mi |
| 2 ft-us | 0.00037878863636363636364 mi |
| 3 ft-us | 0.00056818295454545454546 mi |
| 4 ft-us | 0.00075757727272727272728 mi |
| 5 ft-us | 0.0009469715909090909091 mi |
| 6 ft-us | 0.0011363659090909090909 mi |
| 7 ft-us | 0.0013257602272727272727 mi |
| 8 ft-us | 0.0015151545454545454546 mi |
| 9 ft-us | 0.0017045488636363636364 mi |
| 10 ft-us | 0.0018939431818181818182 mi |
| 20 ft-us | 0.0037878863636363636364 mi |
| 30 ft-us | 0.0056818295454545454546 mi |
| 40 ft-us | 0.0075757727272727272728 mi |
| 50 ft-us | 0.009469715909090909091 mi |
| 100 ft-us | 0.018939431818181818182 mi |
| 1000 ft-us | 0.18939431818181818182 mi |
| 10000 ft-us | 1.8939431818181818182 mi |
For all Length converters, choose units using the From/To dropdowns above.